SZY-5 Turnable Core Pressing Machine
本机适用于电机轴压入铁芯冲片的专用设备。采用三菱PLC程控,彩色触摸屏控制，五个工位转位工作，液压系统作为源动力，入轴时，有测量压力传感器测量入轴时压力，装有测量尺寸光栅尺，当测量压装尺寸值超差或压装力过大或过小时报警，有光电安全保护开关。
Suitable for pressing the core into the lamination.Adopted Mitsubishi PLC, color touch screen control, five workstaitons translocation work,hydraulic system as a source of power, into the shaft, a pressure sensor to measure pressure into the shaft, with measuring the size of grating, alarm if tolerance or press-fit force is too large or too small, a photoelectric safety switch.
技术参数/Technicai Parameters
| 供电电压值Supply voltage | AC380±10% 50Hz |
|
气源压力Air pressure |
0.5~0.7MPa |
|
总功率Total power |
4kw |
| 电机轴长Motor shaft length | ≤300mm |
| 液压压力Hydraulic Pressure |
0~7MPa |
| 公称压力Nominal pressure | 20KN |
