WU-2 Double Station U shaped ;Automatic Inserting machine
本机是圆线弯U成型后插入到工装模具中的专用设备。采用三菱PLC程控，彩色触摸屏修改参数，线头自动剥线，钉字形切断，气缸定长送线，是汽车马达电枢绕组漆包线定长切断，自动成型专用设备。
This machine is a round-line bending U into the tooling after the mold in the special equipment.Mitsubishi PLC program-controlled,color touch screen to modify parameters, thread automatic stripping, nail-shaped cut off, the cylinder fixed-length delivery line,is the motor motor armature winding enameled wire cut off length, automatic molding equipment.
技术参数/Technicai Parameters
| 主机电源电压降Supply voltage | AC220V±10% 50Hz |
| 气动阀门压Air pressure | 0.5~0.7 MPa |
| 总工作效率Total power | 3kw |
| 剥漆长度Stripped length | 0~50mm |
| 送线长度Feeding length | 150~400mm |
|
工位数Workstations |
2 |
| 适用线径Wire range | Φ1.0~Φ2.5mm |
