DX-3 Model Stator Forming Machine
本机适用于发电机定子线圈嵌线后，线圈端部整形的专用设备。采用三菱PLC程控，中文液晶显示界面，本机有水平向心推进来整上下绕组的外形，由上下模整定子绕组内径，水平动作一致，后旋转180°再动作一次完成，更换工装仅四个零件，极为方便，适合多品种生产。
Suitable for generator stator coil embedded line, the coil end of the special equipment shaping.Mitsubishi PLC program control, the Chinese LCD display interface, the machine has a horizontal to the heart to promote the shape of the upper and lower winding, the stator winding stator diameter, Four parts, very convenient, suitable for multi-species production.
技术参数/Technicai Parameters
| 供电电压值Supply voltage | AC380V±10% 50Hz |
|
总功率Total power |
3kw |
| 液压系统压强Hydraulic Pressure | 0~7MPa |
| 最大定子内径Max.Stator ID | ≤Φ120 mm |
| 最小定子内径Stator ID | ≥Φ60 mm |
| 定子叠厚Core thickness | 15~60mm |
