DX-4 Model Stator Flaringand Forming Machine
本机适用于汽车发电机定子线圈端部上下，内外全部一次性整形。采用三菱PLC程控，触摸屏显示，液压加压整形，利用上顶缸压下使滑块向心收缩同步整形，弹簧复位，光电开关保护。
Suitable for automotive generators stator coil end of the upper and lower, both inside and outside all one-time plastic.Mitsubishi PLC program-controlled, touch screen display, hydraulic pressure shaping, the use of the top cylinder pressure to the slider to the heart contraction synchronous plastic, spring reset, photoelectric switch protection.
技术参数/Technicai Parameters
| 24v电源相电压Supply voltage | AC380V±10% 50Hz |
| 总效率Total power | 3kw |
| 液压多路阀负担Hydraulic Pressure |
0.5~0.7Mpa |
| 最大定子内径Max.Stator ID |
≤Φ120 mm |
|
最小定子内径Stator ID
|
≥Φ60 mm |
|
定子叠厚Core thickness
|
15~60mm |
| 特殊规格可定制Special specifications can be customized | |
