ZZ-8 Turntable Eight Stations Shaft Inserting Machine
本机是专为电机轴压入铁芯冲片，适用于高速冲压整体冲片铁芯而设计的专用设备。采用三菱PLC程控,彩色触摸屏控制，八个工位转位工作，入轴时，有测量压力传感器测量入轴时压力，装有测量尺寸光栅尺，当测量压装尺寸值超差或压装力过大或过小设定范围时报警，有光电安全保护开关。
This machine is designed for the motor shaft pressed into the core punch, for high-speed punching the overall punching core design of special equipment.The use of Mitsubishi PLC program-controlled, color touch screen control, eight-bit translocation work into the shaft, the pressure sensor to measure the pressure into the shaft, with measurement of the size of the grating, when measuring the size of the pressure installed pressure tolerance or pressure Too large or too small setting range when the alarm, a photoelectric safety switch.
技术参数/Technicai Parameters
| 电源适配器电压降Supply voltage | AC380±10% 50Hz |
| 氧气源工作压力Air pressure | 0.5~0.7MPa |
| 总最大功率Total power | 3kw |
| 工作行程Working stroke | ≤150mm |
| 液压压力Hydraulic Pressure | 0~7MPa |
| 公称压力Nominal pressure | 20KN |
