SDZ-300B DC output Automatic Commutator Spot Welding Machine
本机是专为电机换向器与电枢绕组连接的一种专用焊接设备。采用进口PLC控制器和触摸屏显示器控制焊机动作，在单个焊点可分别设定压力，配置米亚基逆变焊机联合控制、可定电流、定功率、定电压等控制、多种焊接规范编号、多段通电方式。具有电流缓升、缓降功能。能通过各段焊接电流的合理选择来达到高质量的焊接，工件机械定位对槽，可设定角度补偿，配有内置冷却水箱，进口电磁阀控制焊接气缸，快速稳定，所有动作一次完成，操作简单，性能优越，焊接质量高。
The machine is designed for motor commutator and armature winding connection of a special welding equipment.The use of imported PLC controller and touch screen display control welding movements in a single solder joint can be set pressure, the configuration Miyaji inverter welding control, constant current, constant power, constant voltage control, a variety of welding specifications Number, multi-section power mode. With the current slow rise, slow down function. Can be selected by the reasonable choice of welding current to achieve high-quality welding, the workpiece mechanical positioning on the slot, can be set to the angle compensation, with built-in cooling water tank, import solenoid valve control welding cylinder, fast and stable, all actions once completed Simple, superior performance, high-quality welding.
技术参数/Technicai Parameters
| 供电电流电压Supply voltage | AC380±10% 50Hz |
| 源学习压力Air pressure | 0.5~0.7MPa |
| 变逆器Rectifier(能选Optional) | IPB-5000 / IS-300A |
| 短路电流Short Circuit Current | 5000A / 10000A |
| 可焊线径Wire diameter | Φ0.12~0.5mm/Φ0.5~1.2mm |
| 转子直径Rotor Diameter | ≤Φ90mm |
| 轴径Shaft diameter | ≤Φ17mm |
| 换向器直径Commutator diameter | ≤Φ40mm |
