SKJ-1 Servo Single Cutter Commutator Turning Machine
本机是精密车削电机换向器外径的专用设备。采用进口PLC程控，触摸屏修改参数，伺服电机控制走刀速度，车削均匀稳定，三菱变频无级调速，硬质合金V形块支撑转子轴，轴承档有自动喷油装置，百分表显示进刀车削量，配置高硬度宝石刀头，皮带摩擦转子外圆自动车削，所有动作一次完成，人工上下工件，操作简单方便。
This machine is a precision turning motor commutator diameter of the special equipment. It adopts imported PLC program and touch screen to modify the parameters. The servo motor controls the cutting speed, and the turning is even and stable. Mitsubishi frequency conversion stepless speed regulation, carbide V-block supports the rotor shaft, the bearing file has automatic oil injection device, and the dial indicator shows Knife turning capacity, configuration of high hardness gemstone head, belt friction rotor cylindrical automatic turning, all actions once completed, manual up and down the workpiece, the operation simple and convenient.
技术参数/Technicai Parameters
| 电原端电压Supply voltage | AC220±10% 50Hz |
| 源学习压力Air pressure |
0.5~0.7MPa |
| 总瓦数Total power |
2kw
|
| 转子外径Rotor OD | Φ20~Φ80mm |
| 铣削干硬度Turning roughness | Ra0.4 |
| 换向器长度Commutator length | ≤30mm |
| 换向器直径Commutator diameter | 5~40mm |
| 工件线速度Workpiece line speed | 0~600m/min |
| 转子轴径Rotor shaft diameter | 3~20mm |
